Product ID:POLYOL, SN-3013-A
MSDS Date:12/16/1988
FSC:8030
NIIN:00N020828
MSDS Number: BLMFB

Emergency Phone: 612-481-3300

Info Phone: 612-481-3300

Preparer: INDUSTRIAL HYGIENE

Cage: 0HD19

Telephone: 612-481-3300

Cage: 0HD19

NON HAZARDOUS INGREDIENTS.

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: DIRECT EYE CONTACT WITH PRODUCT
MAY CAUSE IRRITATION. SKIN: PROLONGED OR REPEATED CONTACT MAY CAUSE
IRRITATION. INHALATION: INHALATION IS NOT A ROUTE OF EXPOSURE.
CHRONIC: NO ANTICIPATED CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
ILLNESSES.

First Aid:EYE: FLUSH IMMEDIATELY WITH WATER FOR AT LEAST 15 MINUTES.
CONSULT A PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH MATERIAL
FROM SKIN WITH SOAP AND WATER. INHALATION: REMOVE TO FRESH AIR.
SUPPORT BREAT HING (GIVE ARTIFICIAL RESPIRATION/OXYGEN). CALL MD
IMMEDIATELY . INGEST: CALL MD IMMEDIATELY .

Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WASTE DISP METH: FULLER ENVIRONMENTAL SERVICES 612-481-1588.

HCC:N1
Spec Gravity:1.0423
Appearance and Odor:HEAVY LIQUID.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE.

Waste Disposal Methods:PROD DOES NOT MEET DEFINITION OF HAZ WASTE UNDER
U.S. EPA HAZ WASTE REGS 40 CFR 261. STATE/LOCAL HAZ WASTE REGS MAY
APPLY IF THEY ARE DIFFERENT FROM FED REG. INCINERATE IN AN APPRVD
FACILITY. FOR ADDT NL WASTE DISP ASSISTANCE CONSULT H.B. (SUPP
DATA)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.